Hi!
Short version: Raw_Read_Error_Rate has creeped up to 1 on a new WD Red after running SMART tests and badblocks. RMA the drive?
Long version:
System:
Built the system, original PSU was DOA, ran memtest for 48 hours, memory...
SMART - Raw_Read_Error_Rate on WD Red?
Short version: Raw_Read_Error_Rate has creeped up to 1 on a new WD Red after running SMART tests and badblocks. RMA the drive?
Long version:
System:
- Supermicro X10SLH-F-O
- Xeon E3-1231 v3
- 4 x 8GB Samsung ECC Memory (from Supermicro's compatibility list)
- 6 x 4TB Western Digital Reds (WD40EFRX)
- Seasonic 460W Fanless (SS-460FL2 Active PFC F3)
- Antec 300 Illusion
- FreeNAS 9.2.1.7
Built the system, original PSU was DOA, ran memtest for 48 hours, memory...
SMART - Raw_Read_Error_Rate on WD Red?