The following errors are popping up in the FreeNAS UI:
CRITICAL: Dec. 30, 2017, 10:18 p.m. - Device: /dev/da2 [SAT], 1 Currently unreadable (pending) sectors
CRITICAL: Dec. 31, 2017, 5:21 a.m. - Device: /dev/da2 [SAT], ATA error count increased from 16 to 17
But after running a long SMART test (smartctl -t long /dev/da2), it passes, there's no bad blocks listed under LBA_of_first_error (nor Current_Pending_Sector) despite the results indicating 17 ATA errors like the UI did. I'd like to...
UI indicates bad blocks, but smartctl doesn't...?
CRITICAL: Dec. 30, 2017, 10:18 p.m. - Device: /dev/da2 [SAT], 1 Currently unreadable (pending) sectors
CRITICAL: Dec. 31, 2017, 5:21 a.m. - Device: /dev/da2 [SAT], ATA error count increased from 16 to 17
But after running a long SMART test (smartctl -t long /dev/da2), it passes, there's no bad blocks listed under LBA_of_first_error (nor Current_Pending_Sector) despite the results indicating 17 ATA errors like the UI did. I'd like to...
UI indicates bad blocks, but smartctl doesn't...?