Quantcast
Channel: TrueNAS Community
Viewing all 185907 articles
Browse latest View live

[Review] X11SDV-4C-TP8F - did it

$
0
0
Hey folks,

I'm just sharing my experience with the Supermicro X11SDV-4C-TP8F :)

Currently there are
  • 8x WD Red 1TB
  • 1x Intel SSD 750
  • 1x LSIxxxx (forgotten) in IT-mode
  • 2x Samsung 32GB (M393A4K40CB1-CRC)
  • 1x SNK-C0111AP4L
connected. Used for iSCSI with several ESXi.
The board is working great. Nothing negative to report. The only thing is: heat. CPU has a passive cooling system...

[Review] X11SDV-4C-TP8F - did it

11.2-U2.1 simple VLAN setup not working at all ...

$
0
0
Hi all,

My FreeNAS system:
Code:
bnxt0: flags=8842<BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=e527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
    ether 00:25:90:5f:9a:82
    hwaddr 00:25:90:5f:9a:82
    nd6 options=9<PERFORMNUD,IFDISABLED>
    media: Ethernet autoselect (1000baseT <full-duplex,rxpause,txpause>)
    status: active
vlan1...


11.2-U2.1 simple VLAN setup not working at all ...

Network monitoring by IP

$
0
0
systat -ifstat give only total network usage, i would like to filter by IP is it possible ?

Unsupported volume type

$
0
0
When trying to use my FreeNAS which holds my FCPX libraries with FCPX on MacOS over a smb:// share I get:

Screenshot 2019-01-08 at 11.57.26 AM.png


I heard that FCPX will work with Libraries on network shares if the share is fast enough. I have a wired gigabit connection here. Is there something I am missing??

Running iSCSI Happily But Need To Connect Mac OS X

$
0
0
Hey everyone,

I am happily running iSCSI off my FreeNAS to my own Windows and Linux boxes.

I'm trying to let a user with a Macbook running the latest version of OS X connect to this iSCSI share. I googled "mac os x iscsi" and found some very outdated info so i am asking here now.

Will an initiator be required on that Macbook? If it's not fairly straightforward to set up, would i be better off setting up an AFP share to the same location the iSCSI drives are at? I haven't used a Mac since...

Running iSCSI Happily But Need To Connect Mac OS X

Old PC Case for more HDD Storage

$
0
0
Hi All, after adding my 6th HDD to my Home setup Freenas - I'm now running out of room and gotten to thinking, could I utillise an old PC Case and Power Supply I have hanging around to Power some other Sata HDD's as an External HDD Chassis? I can then route the data SATA cables back to the base Freenas (would have its own dedicated SATA controller in there). This could then give me some storage expansion?

I appreciate I would have to modify the Power Supply switching in the External PC Case...

Old PC Case for more HDD Storage

What does critical error "Currently unreadable (pending) sectors" mean?

$
0
0
So FreeNAS threw this at me this morning:
"CRITICAL: June 9, 2018, 9:57 a.m. - Device: /dev/ada3, 1 Currently unreadable (pending) sectors"
smartctl -t long returned:
Code:
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:	 CT1000MX500SSD1
Serial Number:	xxxxx
LU WWN Device Id: xxxxx
Firmware Version: M3CR010
User Capacity:	1,000,204,886,016...


What does critical error "Currently unreadable (pending) sectors" mean?

Cannot authenticate to OpenDirectory

$
0
0
Hello all,

I have configured a freenas (FreeNAS-11.1-U4) system to authenticate to an openDirectory (
10.11.6
). Configuration seems to be not that bad since I can retrieve the list of my users and the list of groups comming from my ldap server using getent passwd Using ldapsearch and ldapwhoami, I can actually verify my password and it works :

Code:
root@delos:~ # ldapwhoami -vvv -D "uid=legros,cn=users,dc=myserver,dc=mydomain,dc=com" -W -H ldap://myserver:389 -x...


Cannot authenticate to OpenDirectory

nas4free 9.1 raid1 rebuild. Нужна помощь!

$
0
0
Доброго времени. 5 лет прожил на нем массив из 2х дисков по 2тб GPT.

Тут потребовалось перевести из рейда1 в обычный однодисковый вариант. Я удалил второй диск, удалил softraid массив и так это все и жило.

Вопрос такой. Как с имеющегося одного диска и инфы на нем обратно сделать raid1 массив сохраняя при этом все данные?

Обозначил оба диска, как softraid. Собрал обратно в Disk/softwareraid массив из двух дисков. Но теперь нужно как-то его отребилдить . А в статусе...

nas4free 9.1 raid1 rebuild. Нужна помощь!

Replication Task Status Codes

$
0
0
Hi,
the two FreeNAS boxes of mine are happily interacting, one as primary NAS, the other as backup for NAS' datasets. They are set-up according to https://doc.freenas.org/9.10/storage.html#replication-tasks and work flawlessly so far.
What the docs don't tell is which possible status codes the replication scripts holds. I'm asking this because to me they're a bit confusing. These a the ones I am aware of:
  • Sending <pool>/<dataset>@<snapshot> (x %) is quite obvious...

Replication Task Status Codes

What can I replace an Ableconn PCIe 2.0 to SATA III card with?

$
0
0
My motherboard (full info in sig below) has only 6 SATA ports and I need 11. I've been using an Ableconn PEX10-SAT PCIe 2.0 to SATA III card for the 5 additional SATA ports I need, but I've tracked various problems with drives spontaneously dropping out of pools and CAM timeout errors down to this card. The errors occur mainly under heavy load, FWIW. Here's the latest one:

Code:
dmesg | grep -e ada11

ada11: Serial Number XXXXXXXX
ada11: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO...


What can I replace an Ableconn PCIe 2.0 to SATA III card with?

11.2-U2.1 Docker Woes

$
0
0
Hi all,

I have previously had docker working but when i blew away my last working docker machine now i cannot get rancher to load it stays stuck at
Code:
cu -1 /dev/nmdm54B

[root@FreeNAS ~]# cu -l /dev/nmdm54B
Connected


I have tried deleting the hidden .bhyve folder, rebooting etc but still no go.
A standard VM works just fine.

Any help getting this to work will be appreciated.

Lost pool after config reset

$
0
0
Hi all,

Solo pool of a mirrored pair has been running for a little over a month now with no issues on 11.2-U1

Reset config to defaults, as expected needed to remount pools. No other config changes were actually made past making a user and SMB share.

When I try to do so via GUI (Storage -> Pools -> Add -> Import an existing pool etc). Drive is not encrypted. When I get to select the pool it is not in the list.

Spec: E3-1220v6, 8GB ECC, BCM5720 NIC, two mirrored WD 4TB. Specifically this...

Lost pool after config reset

Как проверить работу дедупликации?

$
0
0
Кидаю в папку и под папки одинаковые файлы по 15 Гиг, в "томах" "использовано" пишется полный объём всех копий...
как бы не работает...

HDD Stopped Showing -- Degraded Status


Помогите купить\собрать сервер для highload сервера бэкапов на zfs или мысли с слух почему нет.

$
0
0
изучая freenas и развернув его на тестовой машине с i3 +4gb+ 4x1500GBsata понял, что серьезности у freeNas мало...
потому что одно дело собрать nas сервер для дома другое для high load хранилки на 60 TB под VeeamBackup Ent
суть заключается в том что это ведь должно еще быть грамотно собрано в корзине ведь так?
что имеем
нужно:
60-100Tb хранилку в raid6(ну или как она в zfs2?) 6-8HDD sata или sas15k
10Gb Ethernet
Led check вышедшего из строя HDD для hot spare замены(вы же не будете выключать...

Помогите купить\собрать сервер для highload сервера бэкапов на zfs или мысли с слух почему нет.

Hello guys

$
0
0
Just joining the forum...and with a problem I believe someone here can help me solve...

I am not very certain, but my FreeNAS will not boot from the SATA SSD 3MG2 124GB drive.

I need your help to figure this out...everything has been working fine for the past year plus until now.

I have post the images of the BIOS setup pages..

What am I doing wrong

Помогите пожалуйста собрать сторедж

$
0
0
В общем я не опытный совсем и решил из железа что было собрать сторедж, будет использоваться только бля бекапав и хранения данных.
HP DL180 G6, ECC 72 GB. HP smart array p212 515mb cache (батарейка села никак не включается режим кеширования записи, думаю freenas или купить батарейку).
Купил 12 дисков Toshiba P300 3TB 7200rpm 64MB HDWD130UZSVA 3.5 SATA III (сэкономил и уже очень прям жалею).
В общем поставил RAID 5 + 1 диск в резерве, скорость на практике упала до 10 мегабай запись.
В...

Помогите пожалуйста собрать сторедж

Silent server

$
0
0
Hi

i decided to rebuild my Supermicro build so i can actually have in the house.

the way forward is silent but also cool
these 2 things do not go hand in hand though :-(

I have 2 main questions

1: CPU cooler vertical or horizontal

2: push in air from the top or suck it out ?

i am going to install fans in the lid to either push in or suck our air or both.

i am thinking about cutting 2 holes center above the CPU coolers and then use a duct to get cool air to the CPU and then have...

Silent server

5.25" expanders for more 3.5" drives

Viewing all 185907 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>