Suggestions required for Upgrade Options!!
Hi, I have a system with 1. Intel Core i7-3770K Quad-Core Processor 3.5 GHz 8 MB Cache 2. Intel DH67cl motherboard with 16 GB ECC Ram Samsung 3. 10 x 3 TB hard disk (seagate sv35) configured in raidz2...
View ArticleCan Someone Interpret This For Me?
After installing miniDLNA and starting it on my system, transfer speeds to FreeNAS AFP server has slowed to a crawl from 50-80MB/sec to less than 5MB/sec. I used the installation process from the GUI...
View ArticleResilver Speed?
I am in the process of resilvering a failed HDD in a RaidZ2 pool and the speed started out at ~275M/s, reached a peak of about ~330M/s and has been around ~305M/s the last hour or two and probably has...
View Articlehole_birth ZFS feature = FreeNAS orphan?
FreeNAS 9.2.1 introduced hole_birth ZFS feature. Without doing enough research I upgraded my ZFS pool which enable this feature. I haven't been able to find any other OS/NAS combo that my pool is now...
View ArticleCIFS not running...
hi, FreeNAS-9.2.1.6-RELEASE-x64 (ddd1e39) version I am using and I can not get CIFS service to active status. Provide the following information, the USB version I am using FreeNAS. If you can help me...
View ArticleSuperMicro A1SAi Install on USB
Hey guys, sorry for this very stupid question but i cant seem to figure it out. I am trying to install .6 on an A1SAi but for some reason the USB stick(s) I am using are not seen by the installation...
View ArticlePower loss while Restoring Factory Default , now boot looping
I was having a few probs configuring FreeNAS on my original installation so I decided I would start over completely after I found the official FreeNAS Youtube vids. I had just started a "Restore to...
View Articletmux "device not configured"
Hello everyone, I used the search box here and googled the problem with no joy. I'm setting up FreeNAS for the first time and was running hard drive tests as described in qwertymodo's guide here. I got...
View ArticleNew 32 4TB HDD Server
Hi guys, I have been using a freenas 8 for quite a while now and quite happy with it and runs quite predictably. Anyway now I have installed a new server with the specs but since I am away from it most...
View ArticleClik here to view.
Critique my new build: Avoton Based :-)
Hi All! Switching from a Synology... Really pumped to build my own FreeNAS box. I think I have read all the guides pretty closely so I'll be curious to hear your thoughts. I'll be using the server as a...
View ArticleAdding encryption
Hello all together, not long ago i built my FreeNAS box and its working great so far. The only problem i have with it, is that i didn't create an encrypted zfs-volume, but an unencrypted. I used the...
View ArticleVery slow disk replacement/resilver (RAIDZ2)
Hey all! I had a disk that was showing some offline uncorrectable sectors. I ran the long smartctl test and it failed, so I RMA'd it and have replaced it in my pool. I used the GUI, and followed the...
View ArticleDefault Gateway does not match router IP
In the web GUI in Network Settings - Global Configuration tab it shows IPv4 Default Gateway as 192.168.1.7 I have set the two NICs of the freenas box set to "static" (192.168.1.100 & 192.168.1.101)...
View ArticleFreeNAS 9.1.1 и тормоза при совместном доступе к дискам
Дано: FreeNAS 9.1.1, CPU Intel Pentium G2020, RAM 8 ГБ, HDD 3 х 3 TB, gigabit ethernet. Давно заметил, что если один пользователь использует ресурс (читает/записывает данные), то у второго пользователя...
View ArticleQuestions on my atom C2558 build with Fanless PSU
Hi all, I'm building the following FreeNAS box: Motherboard + CPU: Supermicro MicroATX A1SRM-2558F, $266.67 Memory: Crucial 16GB Kit (8GBx2) DDR3L 1600MT/s (PC3-12800) DR x8 ECC UDIMM 240-Pin Server...
View ArticleHelp with choosing drive configuration
I am going from a 4-bay to a 24-bay enclosure. I am uncertain of the best configuration of my drives. This is for home use: music, movies, pictures, etc. I was thinking I should create an array of...
View ArticlePlexMediaServer is haywire
Has anyone else found the PlexMediaServer (as a plug-in) to be doing crazy things to the point where if it were really this bad nobody would be using it? It is version .9.9.12 of Plex. The plug-in page...
View Article[WIP] MusicBrainz mirror on Freenas
OK, so working with Sickbeard, Couchpotato, sabnzbd and headphones is a dream. However, Headphones has one major problem: the musicbrainz scraping. Installing a musicbrainz mirror on Ubuntu is a pain...
View ArticleHow to fix 1 unreadable sector
What I have are 4 x 1TB HDs setup as Raidz2. Getting this error: smartd[95211]: Device: /dev/ada0, 1 Currently unreadable (pending) sectors Here is some info you can work with (I've bolded parts I...
View Article