So I have a 3tb share on ftp and smb. I have a Minecraft server that backups the server files to the ftp on freenas. I currently have an issue when browsing through smb if I try to delete any of the files it says I don’t have permissions. I set everything up as guest because of the issues I was having and it works but only for a short time. I have to go to storage and click recursive and the apply and it works for only a few hours.
↧
Constantly Grant Permissions
↧
Downgrade Jail
freebsd-version -uk
is showing Code:
11.1-STABLE 11.1-STABLE
and
Code:
11.0-RELEASE-p1
sudo
is not found any more. Before I had the message Code:
undefined symbol: memset_s
Hope someone can help me.
↧
↧
Large 36 x 12TB Build
Hey,
I have a build for which I need to ensure rebuilds do not impact the array, I assume I would be best of doing mirrored vdevs rather than RAIDZ2 or RAIDZ3 vdevs to reduce the impact of rebuilds?
The purpose of the array is a backup target, it's worth noting my backup software does perform consistency checks on the data, hence my worry about rebuilds impacting read/write speeds!
Also it worth having a NVMe PCIe slog? I need to ensure data is committed to the array without fail, I want...
Large 36 x 12TB Build
I have a build for which I need to ensure rebuilds do not impact the array, I assume I would be best of doing mirrored vdevs rather than RAIDZ2 or RAIDZ3 vdevs to reduce the impact of rebuilds?
The purpose of the array is a backup target, it's worth noting my backup software does perform consistency checks on the data, hence my worry about rebuilds impacting read/write speeds!
Also it worth having a NVMe PCIe slog? I need to ensure data is committed to the array without fail, I want...
Large 36 x 12TB Build
↧
Oracle 7320 ZFS Appliance and J4410 Diskshelf problem with PMC Sierra 8001
Hi
So this is my first post on freenas forums (sorry long one) and i have some trouble with old hardware that i want to try to run Freenas on but i hit a brick wall :/ I work as a sysadmin with Unix/Linux since well a long time and one of the reasons that i opted for Freenas was that i have never used freebsd so a lot of new commands and stuff to learn
and this was my thoughts to ease in to it...
So about my problem(s)
I have errors with multipathing and CAM status.
All of a sudden one...
Oracle 7320 ZFS Appliance and J4410 Diskshelf problem with PMC Sierra 8001
So this is my first post on freenas forums (sorry long one) and i have some trouble with old hardware that i want to try to run Freenas on but i hit a brick wall :/ I work as a sysadmin with Unix/Linux since well a long time and one of the reasons that i opted for Freenas was that i have never used freebsd so a lot of new commands and stuff to learn

So about my problem(s)
I have errors with multipathing and CAM status.
All of a sudden one...
Oracle 7320 ZFS Appliance and J4410 Diskshelf problem with PMC Sierra 8001
↧
Rtorrent jail/docker
Is there a simple jail or docker for Rtorrent? Preferably with this user interface https://github.com/jfurrow/flood
↧
↧
Nextcloud Storage Question
Hello, i´m running freenas 11.1 and i have installed the Nextcloud plugin, everything is working fine with SSL and security.
My question is, How can i have my whole LIVE freenas data on nextcloud without duplicity of the data on Jail?
Or maybe whats the best way to achieve this? How can I check my freenas from the cloud service (Ex. Nextcloud)?
Really will appreciate the help.
Thanks in advance.
P.s. Sorry about my english
My question is, How can i have my whole LIVE freenas data on nextcloud without duplicity of the data on Jail?
Or maybe whats the best way to achieve this? How can I check my freenas from the cloud service (Ex. Nextcloud)?
Really will appreciate the help.
Thanks in advance.
P.s. Sorry about my english
↧
dell ucs70 sas cards
It's become clear to me that the hardware I'm using isn't powerful enough for what I'm using my freenas server for.
Mainly plex and off site backups that require encryption etc are swamping the cpu with load averages around 15.0 when trying playing movies (transcoding) which just don't play.
I'll be adding a HomerunHD network box to it later this year for tv dvr further loading up the cpu.
So I bought a dell r610 server as a donor for 2x xeon e5-2650 v3 ( iirc ) and I've build a new atx...
dell ucs70 sas cards
Mainly plex and off site backups that require encryption etc are swamping the cpu with load averages around 15.0 when trying playing movies (transcoding) which just don't play.
I'll be adding a HomerunHD network box to it later this year for tv dvr further loading up the cpu.
So I bought a dell r610 server as a donor for 2x xeon e5-2650 v3 ( iirc ) and I've build a new atx...
dell ucs70 sas cards
↧
Plex Camera Upload Permission Denied
I am trying to set up Plex to allow for Camera Upload from my phone to perform backups of my photos for my wife and I. We have Plex configured on a jail. The dataset for Plex is owned by root/wheel by default right now. We are logged in to the storage on my Windows 10 machine as root to map it as a network drive. But even with that, I am unable to create folders or modify anything there.
For Plex, I noticed in the log files that the Plex app on my phone is successfully uploading the...
Plex Camera Upload Permission Denied
For Plex, I noticed in the log files that the Plex app on my phone is successfully uploading the...
Plex Camera Upload Permission Denied
↧
cam status ATA status error
Hello,
I've been experiencing some problems with my Freenas server. When I run dmesg from the shell then I see a lot of cam status ATA status errors which I don't know what they mean. Here is a screenshot of it when it occured again. It does not always occur:
![[IMG]]()
I have the following hardware:
HP Microserver Gen8
16GB ECC RAM
4x4TB WD RED NAS drives (which I bought new, 2,5 weeks ago and replaces all my previous drives which were 4x2TB drives)...
cam status ATA status error
I've been experiencing some problems with my Freenas server. When I run dmesg from the shell then I see a lot of cam status ATA status errors which I don't know what they mean. Here is a screenshot of it when it occured again. It does not always occur:
![[IMG]](http://i.imgur.com/g4FuTX9.png)
I have the following hardware:
HP Microserver Gen8
16GB ECC RAM
4x4TB WD RED NAS drives (which I bought new, 2,5 weeks ago and replaces all my previous drives which were 4x2TB drives)...
cam status ATA status error
↧
↧
IBM BR10I b3/b1 (1068E) and IBM backplane 6 port expander
I have two BR10I and 4 x IBM 6 port SAS backplanes. Normaly the backplanes is only one in a server so having two on each HBA is not the normal. I tried using two of these for a 12 disk setup on each card. Problem is that only one of the expanders works at one time. I tested them all individually and the do work. As soon as I connected two to one HBA one of them fails and the disks go offline after access or init. I can see the disks but the will say PD offline once I try to add them in...
IBM BR10I b3/b1 (1068E) and IBM backplane 6 port expander
IBM BR10I b3/b1 (1068E) and IBM backplane 6 port expander
↧
First Intel build - Will it FreeNAS?
A while back I decided I wanted to build a FreeNAS box for my small personal network. I have various files on multiple drives that I hotswap. That's really getting old.
I've never built an Intel system before, always built AMD. But I want to do this right with ECC memory. Also will set up with two parity drives.
I might want to add ownCloud later.
I've been buying 4TB drives as I can over the past several months (I'm now up to six drives) and need to start buying other system components....
First Intel build - Will it FreeNAS?
I've never built an Intel system before, always built AMD. But I want to do this right with ECC memory. Also will set up with two parity drives.
I might want to add ownCloud later.
I've been buying 4TB drives as I can over the past several months (I'm now up to six drives) and need to start buying other system components....
First Intel build - Will it FreeNAS?
↧
Resilvering reading all disks in multi VDEV Mirror set
I was wondering if anybody can help to explain the results I'm seeing when resilvering a disk in only one of the mirrored VDEVs in my Zpool.
If I understand Mirrors properly, resilvering one should only need to read the other drive in that same mirrored VDEV.
What I am observing is that the drives in the other 2 VDEVs are also reading at the same data rate as the one in the "expected" VDEV.
I should explain that I'm building up a new zpool and have deliberately taken one drive in each...
Resilvering reading all disks in multi VDEV Mirror set
If I understand Mirrors properly, resilvering one should only need to read the other drive in that same mirrored VDEV.
What I am observing is that the drives in the other 2 VDEVs are also reading at the same data rate as the one in the "expected" VDEV.
I should explain that I'm building up a new zpool and have deliberately taken one drive in each...
Resilvering reading all disks in multi VDEV Mirror set
↧
Automatic Phone Picture Uploads?
Is this possible to accomplish? I would like to have an automated system on my phone and my wife's phone that automatically uploads pictures to my FreeNAS storage in a specific directory whenever the phones connect to the local wireless network in the house. Basically when I get home from work or whatever, my phone automatically connects to the WiFi in the house. I want this to trigger something on my phone that automatically uploads all photos (only the new ones that haven't been...
Automatic Phone Picture Uploads?
Automatic Phone Picture Uploads?
↧
↧
Make bootable USB stick for BIOS update using macOS?
I want to update the BIOS on my two servers with Supermicro boards (X10SRH-cF and X10SL7-F). I've downloaded the 3.0a BIOS for each of these boards, and if I understand the directions correctly, I "simply" need to copy the contents of the expanded zip files onto a bootable USB stick. Do I need to add an OS such as FreeDOS, or are the contents of the BIOS zip from Supermicro all I need?
How would I create a bootable USB stick using macOS 10.13? All the info I've found so far assumes you...
Make bootable USB stick for BIOS update using macOS?
How would I create a bootable USB stick using macOS 10.13? All the info I've found so far assumes you...
Make bootable USB stick for BIOS update using macOS?
↧
No suitable video mode found. Booting in EFI blind mode
After upgrading to FreeNAS-9.10.2-U6, I'm getting this error message on boot:
It boots, but I have no console video. I can access the FreeNAS server by a web browser from another computer.
Please advise how to get video to work on the actual FreeNAS machine. Thanks.
Code:
Booting 'Normal Bootup' error: no suitable video mode found. Booting in EFI blind mode Press any key to continue... _
It boots, but I have no console video. I can access the FreeNAS server by a web browser from another computer.
Please advise how to get video to work on the actual FreeNAS machine. Thanks.
↧
SSD Not Listed for Install of FreeNAS OS
I built my installation disk as directed in the guide for version 11; however, when I start the install, the SSD is not listed for me to install the OS onto during setup. I can only see the disks I plan to use for storage. I'm sure it is something simple I am overlooking but I am getting very frustrated. Thanks in advance for any assistance!
↧
FreeNAS crashed after deleting large dataset, now stuck on "slow spa_sync"
Hi,
Earlier today I deleted a rather large dataset (16.2TB) from a 120TB pool.
A few hours later the server crashed, it would no longer respond to any input for at least an hour.
At this point I issued a hard reset (it would not respond to a soft one)
With IPMIview I managed to gather a few lines of the boot progress, sadly lots of stuff got printed over so this is not a full log.
![[IMG]]()
But as you can see the...
FreeNAS crashed after deleting large dataset, now stuck on "slow spa_sync"
Earlier today I deleted a rather large dataset (16.2TB) from a 120TB pool.
A few hours later the server crashed, it would no longer respond to any input for at least an hour.
At this point I issued a hard reset (it would not respond to a soft one)
With IPMIview I managed to gather a few lines of the boot progress, sadly lots of stuff got printed over so this is not a full log.
![[IMG]](http://i.imgur.com/1RRY2gj.png)
![[IMG]](http://i.imgur.com/iU9I8sW.png)
But as you can see the...
FreeNAS crashed after deleting large dataset, now stuck on "slow spa_sync"
↧
↧
SMB Service will NOT start
I am thinking Version11.1-U4 is a little goofy. I'm running into little corky issues all over the place.
For one I can't even start the SMB service. I have even tried to start the service from the terminal and had no luck. Is anybody else having these issues?
View attachment 23925
For one I can't even start the SMB service. I have even tried to start the service from the terminal and had no luck. Is anybody else having these issues?
View attachment 23925
↧
Upgrading to a new USB stick
I am running 11.1-Release on an 8G USB, and I am running out of room.
Just bought a 32G and want to move it over..
It looks like i just need to install 11.1-Release on the new USB and upload the config.db in to it..
is it really that simple? nothing I need to get from the jails?
Thanks
Bandion
Just bought a 32G and want to move it over..
It looks like i just need to install 11.1-Release on the new USB and upload the config.db in to it..
is it really that simple? nothing I need to get from the jails?
Thanks
Bandion
↧
HOWTO: Installing ZoneMinder in a FreeNAS 11 Jail
Introduction
Disclaimer:
HOWTO: Installing ZoneMinder in a FreeNAS 11 Jail
Disclaimer:
- This is designed to provide a quick and dirty overview on getting ZoneMinder (ZM) up and running within a jail on FreeNAS. It is up to you to adapt this to your own circumstances and to ensure you secure everything after installation – this HOWTO does not result in a secure installation!!
- This guide assumes you are familiar with the basics of FreeNAS, fundamental Linux etc, you will need to be able to access the FreeNAS web UI...
HOWTO: Installing ZoneMinder in a FreeNAS 11 Jail
↧